Skip to main content

Washer Repair in Forney, TX

From machines that won't spin to those leaking all over your laundry room, our technicians troubleshoot and repair all washer makes and models quickly. Don't haul your laundry to the laundromat — call us for same-day service and get back to your routine. Wade and Jake bring 60+ years of third-generation appliance expertise to every job, your service call fee is waived when the repair proceeds, and all parts carry a 90-day warranty.

Washer repair in Forney, TX — Kaufman County Appliance Repair
Since 1960 — 3rd Generation
4.9★ · 168 Google Reviews
90-Day Parts Warranty
Same-Day Service Available

Common Washer Problems We Fix

We diagnose the root cause before recommending any repair — so you only pay for what your washer actually needs.

Drain Pump Failure

A failed drain pump leaves standing water in the drum after a cycle. We test pump impellers, check for clogs from socks or debris, and replace worn pump assemblies to restore proper draining.

Lid Switch & Door Lock

Top-load washers rely on a lid switch to start the spin cycle, while front-loaders use an electronic door latch. A faulty switch or lock prevents the machine from advancing — we diagnose and replace both quickly.

Drive Belt & Motor Coupling

A snapped drive belt or cracked motor coupling is one of the most common reasons a washer hums but the drum refuses to turn. We stock belts and couplings for major brands and most repairs are completed the same day.

Water Inlet Valve

When your washer fills too slowly, overfills, or will not fill at all, the water inlet valve is usually to blame. We test solenoid coils and screens, flush sediment buildup, and replace valves when needed to restore normal fill cycles.

Transmission & Spin Bearing

A grinding or rumbling noise during the spin cycle often points to worn drum bearings or a failing transmission. Left unaddressed, bearing failure can damage the tub seal and cause leaks. We rebuild or replace these components to stop the noise and protect the tub.

Control Board Issues

Modern washers depend on electronic control boards to manage cycles, water levels, and motor speed. Error codes, frozen displays, or cycles that start and stop unexpectedly often trace back to a faulty board — we diagnose and replace control modules for all major brands.

⚠ When to Call for Washer Repair

Do not wait for a small problem to turn into a flooded laundry room or a burned-out motor. Call us if you notice any of the following:

⚠ Washer will not spin or agitate at all

⚠ Standing water remains in the drum after the cycle ends

⚠ Loud banging, grinding, or squealing during spin

⚠ Machine vibrates excessively or walks across the floor

⚠ Water leaking from the door seal, hoses, or pump housing

⚠ Error codes on the display or control panel unresponsive

Call (214) 440-8550 or request a same-day appointment.

Our Washer Repair Process

1

Call or Book Online

Reach us at (214) 440-8550 or submit our online form. Tell us the brand, model, and what the washer is doing — we schedule same-day or next-day service in Forney and surrounding Kaufman County.

2

Thorough Diagnosis

Wade or Jake arrives on time, runs the washer through its cycles, and pinpoints the root cause using diagnostic tools and decades of hands-on experience — not guesswork.

3

Upfront Repair Quote

We present a firm quote before any work begins. Your service call fee is waived when the repair proceeds — no surprise charges, no pressure to approve work you are not comfortable with.

4

Same-Day Repair & Warranty

Most washer repairs are completed on the spot using stocked parts. Every repair is backed by our 90-day parts warranty and 30-day labor warranty so you can wash with confidence.

Why Repair Instead of Replace?

  • A mid-range washer costs $600–$1,200 new — most repairs cost a fraction of that, even for complex jobs like bearings or control boards.
  • Appliance manufacturing quality peaked decades ago. A well-maintained older washer often outlasts a budget replacement by years.
  • Buying a new washer means delivery wait times, installation fees, and haul-away costs that add up fast — repair gets your laundry done today.
  • Disposing of a washing machine adds hundreds of pounds of metal, plastic, and motor components to the waste stream. Repair is the greener choice.
  • A repaired washer with a known service history is a known quantity. A new budget model may introduce new reliability problems within the first year.
  • Our 90-day parts and 30-day labor warranty means your repaired washer is covered — giving you real peace of mind after every service call.

Washer Repair FAQ

How much does washer repair typically cost in Forney, TX?

Most washer repairs in our area fall between $120 and $350 depending on the part and labor involved. Simple fixes like a lid switch or drain pump typically land on the lower end, while a drum bearing replacement or control board swap sit higher. We always provide a firm quote before any work begins, and your diagnostic service call fee is waived when you proceed with the repair — so you are never paying twice. Compared to a new washer purchase of $600 to $1,200 or more, repair is almost always the smarter financial choice.

My washer fills with water but will not agitate or spin — what is wrong?

This symptom usually points to one of three culprits: a broken drive belt, a failed motor coupling, or a defective lid switch (on top-loaders) or door latch (on front-loaders). The machine receives power and fills because those systems are separate from the drive train, but the drum cannot move because the mechanical or electrical link is broken. In some cases the motor itself may be failing. Wade and Jake carry belts, couplings, and lid switch assemblies for the most common brands, so this is frequently a same-day repair.

Is it worth repairing a front-load washer that is leaking?

In most cases, yes. Front-load washer leaks almost always originate from a worn door boot seal, a cracked drain hose, a deteriorated tub-to-pump hose, or a failing pump. Door boot seals are among the most common front-loader repairs and are well worth fixing — the alternative is a new machine for $800 or more. The only scenario where we would steer you toward replacement is if the outer tub itself is cracked or the frame is corroded, which is rare. We will give you an honest assessment during the diagnostic visit so you can make an informed decision.

Do you repair both top-load and front-load washers, and all brands?

Yes — our technicians service all major washer configurations including traditional top-load, high-efficiency top-load (no agitator), and front-load machines. We work on Whirlpool, Maytag, Samsung, LG, GE, Frigidaire, Speed Queen, Bosch, Electrolux, Amana, and more. With over 60 years of combined experience and three generations of appliance knowledge, Wade and Jake have seen nearly every failure mode across every major platform. If your washer brand is not listed, call us — we will let you know right away whether we can help.

Washer on the Fritz? Get Same-Day Repair in Forney.

Don't spend another evening at the laundromat. Call Kaufman County Appliance Repair and our technicians will diagnose your washer, give you an upfront quote, and complete most repairs the same day — backed by a 90-day parts warranty.

Free estimates • No obligation • Licensed & insured

Call Now Free Estimate